Anodized version of this lovely ISO G2 refill pen. This design really turned out well. Now with an OHTO needle point refill. Still reserving some stock for email sales, so if you have already sent in an email, I will get to it. Unfortunately the rate I am getting emails at, is greater than my ability to reply. I am feeling quite overwhelmed, but I have really been appreciating all of the kind emails I am receiving. Thanks again for following along, and I appreciate the patience! I am working at making things better for the future.
Triple bevel nose with a click mechanism. Titanium design weighing in at a hefty 44.4g, measuring 0.48" (12.2mm) and 4.87" long. Built for the standard ISO G2 refill and equipped with the OHTO PG-M05NP Refill.
The travel of the refill nose is fully support throughout the entire cycle yielding a very smooth action. A captured element on the back of the refill prevents any rattle.The mechanism comes equipped with two 4mm stainless steel bearing balls. Tip details are extremely tight with a small land between the refill and the conical section. Proper allowance and a custom precision spring allow the refill to operate smoothly. There is a tight fit between the button stanchion and the mechanism body making it more resistant to binding from pressing the button on an angle. Higbee thread start to the pen body to make the thread action for replacing the refill better. And a locking feature that should keep the mechanism from unscrewing without the need for an o-ring or loctite.
